Videofied Outdoor MotionViewer

---

The Outdoor MotionViewer combines motion detection and video verification into a single wireless, battery-powered device. When motion is detected while the system is armed, it records a short video clip and sends it to the monitoring center, allowing operators to verify what caused the alarm before requesting law enforcement dispatch.

The Outdoor MotionViewer is designed to protect outdoor areas where early detection and video verification are important. It's commonly used around construction sites, equipment yards, material storage areas, temporary facilities, and other locations where reliable battery-powered security is needed.

• Motion Detection & Video Verification – Combines a motion detector and video camera into one device, allowing alarm events to be visually verified. 
• No Power Required – Battery-powered operation allows installation almost anywhere without electrical wiring. 
• Built for Outdoor Conditions– Weather-resistant construction designed for year-round outdoor use. 
• Night Vision – Infrared illumination captures video in complete darkness. While motion detection extends well beyond the illuminated area, nighttime video visibility is limited to approximately 14 feet. During daylight hours, the camera can see significantly farther. 
• Tamper Protection – Detects attempts to remove or tamper with the device. 
• Real-World Battery Life – Battery life is typically 12–24 months, depending on detector activity and the number of alarm/video transmissions. 

I recommend the Outdoor MotionViewer whenever a Videofied system requires outdoor intrusion detection with video verification. It combines motion detection and video recording into a single battery-powered device, allowing the monitoring center to verify what caused an alarm before requesting law enforcement dispatch.

Proper placement is critical to getting the best performance from any outdoor motion detector. I design each system around the site layout, expected traffic patterns, and the areas that need the most protection to provide reliable detection while minimizing unnecessary alarm activity.

Detection

• PIR motion detection 
• Integrated video verification 
• Day and night operation 
• Approximately 50 ft motion detection range 
• Approximately 14 ftnighttime IR video illumination 

Communication

• Encrypted wireless communication with the Videofied Panel 
• Video transmission to the monitoring center 

Power

• Battery powered 
• Real-world battery life:approximately 12–24 months, depending on activity 

Installation

• Outdoor installation 
• Weather-resistant enclosure 
• Tamper protected