Ajax MotionCam Indoor (PhOD)

---

The Indoor MotionCam is a wireless motion detector with a built-in camera that helps verify alarm events. When motion is detected, it captures a series of images so you can quickly see what caused the alarm. With Photo on Demand, you can also request images anytime from the Ajax app.

The Indoor MotionCam is designed to protect interior spaces after someone has entered the building. It's commonly installed in hallways, offices, living rooms, warehouses, storage areas, and other locations where reliable motion detection and visual verification are important.

• Photo on Demand – Request images from the detector anytime using the Ajax app. 
• Visual Verification – Know what caused an alarm before deciding how to respond. 
• Fast Photo Delivery – The first image is typically delivered in about 9 seconds. 
• Detects Motion Up to 39 Feet– Helps protect large interior spaces with a single detector. 
• Helps Reduce False Alarms – Adjustable sensitivity and pet immunity help minimize unwanted alarms when installed correctly. 
• Privacy Focused – Images are only taken during authorized events or when requested by an authorized user.   
• Long      Battery Life – Typically up to 3 years with Photo on Demand      enabled, or 4 years when it's disabled.

 Motion Detection

• Detection range: up to 39 ft 
• Detection angle: 88.5° 
• Pet immunity: up to 44 lbs and approximately 20 inches tall when      properly installed 

Photo Verification

• Up to 640× 480 image resolution 
• 1–5 images per event 
• First image delivery: approximately 9 seconds 
• HDR image enhancement 
• Infrared illumination for low-light conditions 

Communication

• Wireless communication range: up to 5,600 ft (1,700 m) in open air 
• Encrypted  wireless communication 

Power

• Two pre-installed CR123A batteries 
• Up to 3–4 years battery life depending on Photo on Demand usage 

Installation

• Indoor installation 
• Recommended mounting height: 8 ft 
• Operating temperature: 14°F to 104°F 
• Protection rating: IP50